How to create ISO image of a cd/dvd on Solaris

[Ramesh Polepalli]

Hi,



Please tell me How to create ISO image of a cd/dvd on Solaris.

Thanks in advance for the help.



Regards,

Ramesh P S












An AlwaysOn AO100 Top Private Company – 2006




This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and/or privileged information. Any use, disclosure or distribution by anyone other than the intended recipient(s) is prohibited. If you are not an intended recipient, please contact the sender by reply and destroy all copies of the original message contents.
Thank you!

[Judy Chen]

To create ISO image:
mkisofs -o xxx.iso -J -R /full-path-to-data/

To burn the CD:
cdrw -i /full-path/xxx.iso

- Judy

Post by Ramesh Polepalli
Please tell me How to create ISO image of a cd/dvd on Solaris.
Thanks in advance for the help.

[Joerg.Schilling-8LS2qeF34IpklNlQbfROjRvVK+ (Joerg Schilling)]

Post by Ramesh Polepalli
Please tell me How to create ISO image of a cd/dvd on Solaris.

Use readcd(1) to read the CD/DVD and write it into a file.
Then write this again to CD/DVD using cdrecord.

Jörg

[John Brewer]

These commends used to work, under both Solaris and snv_bXX. This is a good iso image, this was used in a luupgrade from 10u4 w. patches to snv_b78, I tried to create a iso install dvd from the iso image!

These commands used to work:
bash-3.2# cdrw -i /zones/sol-nv-b78-x86-dvd.iso
Looking for CD devices...
Initializing device...done.
Size required (3674931200 bytes) is greater than available space (577713611856941088 bytes).
bash-3.2#
bash-3.2# readcd -V dev=1,0,0 -w f=sol-nv-b78-x86-dvd.iso

bash-3.2# svcs |grep vol
online 10:49:00 svc:/system/filesystem/rmvolmgr:default
bash-3.2# svcadm disable rmvolmgr
bash-3.2# readcd -V dev=1,0,0 -w f=sol-nv-b78-x86-dvd.iso

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s

Executing 'inquiry' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 12 00 00 00 24 00
cmd finished after 0.001s timeout 40s
Inquiry Data : 05 80 00 32 5B 00 00 00 48 4C 2D 44 54 2D 53 54 44 56 44 52 41 4D 20 47 53 41 2D 48 31 30 4E 20 4A 4C 31 32

Executing 'inquiry' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 12 00 00 00 60 00
cmd finished after 0.002s timeout 40s
Inquiry Data : 05 80 00 32 5B 00 00 00 48 4C 2D 44 54 2D 53 54 44 56 44 52 41 4D 20 47 53 41 2D 48 31 30 4E 20 4A 4C 31 32 01 00 30 33 31 31 30 39 30 36 31 39 45 34 4B 47 34 30 34 38 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Inquiry Data : ...2[...HL-DT-STDVDRAM GSA-H10N JL12..0311090619E4KG4048........................................

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.002s timeout 40s

Executing 'mode sense g1' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 5A 00 3F 00 00 00 00 00 08 00
cmd finished after 0.002s timeout 40s
Mode Sense Data 00 F4 41 00 00 00 00 00

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s

Executing 'mode sense g1' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 5A 00 2A 00 00 00 00 00 02 00
cmd finished after 0.001s timeout 40s
Mode Sense Data 00 46
Mode Sense Data (converted) 43

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.002s timeout 40s

Executing 'mode sense g1' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 5A 00 2A 00 00 00 00 00 48 00
cmd finished after 0.002s timeout 40s
Mode Sense Data 00 46 41 00 00 00 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data (converted) 43 41 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data 43 41 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mode Page Data 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s

Executing 'mode sense g1' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 5A 00 2A 00 00 00 00 00 48 00
cmd finished after 0.002s timeout 40s
Mode Sense Data 00 46 41 00 00 00 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data (converted) 43 41 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data 43 41 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s

Executing 'mode sense g1' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 5A 00 3F 00 00 00 00 00 08 00
cmd finished after 0.002s timeout 40s
Mode Sense Data 00 F4 41 00 00 00 00 00

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s

Executing 'mode sense g1' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 5A 00 2A 00 00 00 00 00 02 00
cmd finished after 0.001s timeout 40s
Mode Sense Data 00 46
Mode Sense Data (converted) 43

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s

Executing 'mode sense g1' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 5A 00 2A 00 00 00 00 00 48 00
cmd finished after 0.002s timeout 40s
Mode Sense Data 00 46 41 00 00 00 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data (converted) 43 41 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data 43 41 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mode Page Data 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.002s timeout 40s

Executing 'mode sense g1' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 5A 00 2A 00 00 00 00 00 48 00
cmd finished after 0.002s timeout 40s
Mode Sense Data 00 46 41 00 00 00 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data (converted) 43 41 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data 43 41 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Executing 'get_configuration' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 46 00 00 00 00 00 00 00 08 00
cmd finished after 0.002s timeout 40s

Executing 'set cd speed' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: BB 00 FF FF FF FF 00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s

Executing 'mode sense g1' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 5A 00 2A 00 00 00 00 00 02 00
cmd finished after 0.001s timeout 40s
Mode Sense Data 00 46
Mode Sense Data (converted) 43

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s

Executing 'mode sense g1' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 5A 00 2A 00 00 00 00 00 48 00
cmd finished after 0.002s timeout 40s
Mode Sense Data 00 46 41 00 00 00 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data (converted) 43 41 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data 43 41 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mode Page Data 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s

Executing 'mode sense g1' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 5A 00 2A 00 00 00 00 00 48 00
cmd finished after 0.002s timeout 40s
Mode Sense Data 00 46 41 00 00 00 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data (converted) 43 41 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data 43 41 00 00 2A 3E 3F 37 F1 73 2B 23 56 91 01 00 08 00 56 91 00 00 2B 48 2B 48 00 01 00 00 00 00 2B 48 00 02 00 00 2B 48 00 00 15 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Read speed: 22161 kB/s (CD 125x, DVD 16x).
Write speed: 11080 kB/s (CD 62x, DVD 8x).

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s

Executing 'read capacity' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 25 00 00 00 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s
Capacity: 1 Blocks = 2 kBytes = 0 MBytes = 0 prMB
Sectorsize: 2048 Bytes
Copy from file 'sol-nv-b78-x86-dvd.iso' to SCSI (1,0,0) disk
end: 10000000
addr: 0 cnt: 28
Executing 'write_g0' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 0A 00 00 00 1C 00
/usr/bin/readcd.bin: I/O error. write_g0: scsi sendcmd: no error
CDB: 0A 00 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 0A 00 00 0C 20 00 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 57344
cmd finished after 0.002s timeout 40s
/usr/bin/readcd.bin: I/O error. Cannot write destination disk
bash-3.2#
bash-3.2# ./mountiso.sh
+ lofiadm -a /zones/sol-nv-b78-x86-dvd.iso /dev/lofi/1
+ mount -F hsfs -o ro /dev/lofi/1 /mnt
bash-3.2# ls /mnt
autorun.inf JDS-THIRDPARTYLICENSEREADME
autorun.sh License
boot README.txt
Copyright sddtool
DeveloperTools Solaris_11
installer Sun_HPC_ClusterTools
bash-3.2#
bash-3.2#
bash-3.2# cdrw -v -i /zones/sol-nv-b78-x86-dvd.iso
Looking for CD devices...
Initializing device...done.
Size required (3674931200 bytes) is greater than available space (577713594677071904 bytes).
bash-3.2# truss -eaf cdrw -v -i /zones/sol-nv-b78-x86-dvd.iso
1327: execve("/usr/bin/cdrw", 0x08047370, 0x08047384) argc = 4
1327: argv: cdrw -v -i /zones/sol-nv-b78-x86-dvd.iso
1327: envp:
1327: MANPATH=/usr/dt/man:/usr/man:/usr/sfw/man:/usr/X11/man:/usr/openwin/share/man:/usr/gnu/share/man
1327: SSH_AGENT_PID=880 DTSOURCEPROFILE=true
1327: LC_MONETARY=en_US.ISO8859-1 TERM=xterm SHELL=/sbin/sh
1327: SDT_NO_TOOLTALK=1 DESKTOP_STARTUP_ID=
1327: GTK_RC_FILES=/etc/gtk/gtkrc://.gtkrc-1.2-gnome2
1327: WINDOWID=50331706 LC_NUMERIC=en_US.ISO8859-1
1327: DTHELPSEARCHPATH=//.dt/help/root-familypc-0/%H://.dt/help/root-familypc-0/%H.sdl://.dt/help/root-familypc-0/%H.hv://.dt/help/%H://.dt/help/%H.sdl://.dt/help/%H.hv:/usr/dt/appconfig/help/%L/%H:/usr/dt/appconfig/help/%L/%H.sdl:/usr/dt/appconfig/help/%L/%H.hv:/usr/dt/appconfig/help/C/%H:/usr/dt/appconfig/help/C/%H.sdl:/usr/dt/appconfig/help/C/%H.hv
1327: GTK_MODULES=gnomebreakpad USER=root DTDEVROOT=
1327: OPENWINHOME=/usr/openwin DTXSERVERLOCATION=local
1327: XMBINDDIR=/usr/dt/lib/bindings
1327: SSH_AUTH_SOCK=/tmp/ssh-XXvea4Tb/agent.879
1327: GNOME_KEYRING_SOCKET=/var/tmp/keyring-ryaW8b/socket
1327: SESSION_MANAGER=local/familypc:/tmp/.ICE-unix/981,inet6/familypc:39396,inet/familypc:60205
1327: SESSION_SVR=familypc
1327: HELPPATH=/usr/openwin/lib/locale:/usr/openwin/lib/help
1327: PATH=/usr/sbin:/usr/bin:/usr/openwin/bin:/usr/ucb:/usr/sfw/bin
1327: MAIL=/var/mail/root LC_MESSAGES=en_US.ISO8859-1
1327: LC_COLLATE=en_US.ISO8859-1 PWD=/zones START_SPECKEYSD=no
1327: EDITOR=/usr/dt/bin/dtpad LANG=en_US.ISO8859-1
1327: DTAPPSEARCHPATH=//.dt/appmanager:/usr/dt/appconfig/appmanager/%L:/usr/dt/appconfig/appmanager/C
1327: TZ=US/Eastern SDT_NO_DTDBCACHE=1
1327: XFILESEARCHPATH=/usr/openwin/lib/locale/%L/%T/%N%S:/usr/openwin/lib/%T/%N%S
1327: VTE_CJK_WIDTH=1 SESSIONTYPE=altDt SHLVL=1 HOME=/
1327: DTSCREENSAVERLIST=StartDtscreenSwarm StartDtscreenQix StartDtscreenFlame StartDtscreenHop StartDtscreenImage StartDtscreenLife StartDtscreenRotor StartDtscreenPyro StartDtscreenWorm StartDtscreenBlank
1327: GNOME_DESKTOP_SESSION_ID=Default LOGNAME=root
1327: G_FILENAME_ENCODING=@locale,UTF-8
1327: AB_CARDCATALOG=/usr/dt/share/answerbooks/en_US.ISO8859-1/ab_cardcatalog
1327: LC_CTYPE=en_US.ISO8859-1
1327: DBUS_SESSION_BUS_ADDRESS=unix:path=/tmp/dbus-j4mJv6sMQm,guid=aab31903729b3870c5f3e700476e8389
1327: DTDATABASESEARCHPATH=//.dt/types,/usr/dt/appconfig/types/%L,/usr/dt/appconfig/types/C
1327: XMICONSEARCHPATH=//.dt/icons/%B%M.pm://.dt/icons/%B%M.bm://.dt/icons/%B:/usr/dt/appconfig/icons/%L/%B%M.pm:/usr/dt/appconfig/icons/%L/%B%M.bm:/usr/dt/appconfig/icons/%L/%B:/usr/dt/appconfig/icons/C/%B%M.pm:/usr/dt/appconfig/icons/C/%B%M.bm:/usr/dt/appconfig/icons/C/%B
1327: DTUSERSESSION=root-familypc-0 DISPLAY=:0.0
1327: XMICONBMSEARCHPATH=//.dt/icons/%B%M.bm://.dt/icons/%B%M.pm://.dt/icons/%B:/usr/dt/appconfig/icons/%L/%B%M.bm:/usr/dt/appconfig/icons/%L/%B%M.pm:/usr/dt/appconfig/icons/%L/%B:/usr/dt/appconfig/icons/C/%B%M.bm:/usr/dt/appconfig/icons/C/%B%M.pm:/usr/dt/appconfig/icons/C/%B
1327: LC_TIME=en_US.ISO8859-1 G_BROKEN_FILENAMES=yes
1327: dtstart_sessionlogfile=/dev/null COLORTERM=gnome-terminal
1327: _=/usr/bin/truss
1327: resolvepath("/usr/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12
1327: resolvepath("/usr/bin/cdrw", "/usr/bin/cdrw", 1023) = 13
1327: sysconfig(_CONFIG_PAGESIZE) = 4096
1327: xstat(2, "/usr/bin/cdrw", 0x08047018) = 0
1327: open("/var/ld/ld.config", O_RDONLY) Err#2 ENOENT
1327: xstat(2, "/lib/libvolmgt.so.1", 0x080467C8) Err#2 ENOENT
1327: xstat(2, "/usr/lib/libvolmgt.so.1", 0x080467C8) = 0
1327: resolvepath("/usr/lib/libvolmgt.so.1", "/usr/lib/libvolmgt.so.1", 1023) = 23
1327: open("/usr/lib/libvolmgt.so.1", O_RDONLY) = 3
1327: mmap(0x00010000, 32768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFEFB0000
1327: mmap(0x00000000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFEFA0000
1327: mmap(0x00010000, 81920, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEF80000
1327: mmap(0xFEF80000, 10036, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEF80000
1327: mmap(0xFEF93000, 1076, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 12288) = 0xFEF93000
1327: munmap(0xFEF83000, 65536) = 0
1327: memcntl(0xFEF80000, 4944, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
1327: close(3) = 0
1327: xstat(2, "/lib/libsecdb.so.1", 0x080467C8) = 0
1327: resolvepath("/lib/libsecdb.so.1", "/lib/libsecdb.so.1", 1023) = 18
1327: open("/lib/libsecdb.so.1", O_RDONLY) = 3
1327: mmap(0xFEFB0000, 32768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFEFB0000
1327: mmap(0x00010000, 86016, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEF60000
1327: mmap(0xFEF60000, 13918, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEF60000
1327: mmap(0xFEF74000, 822, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 16384) = 0xFEF74000
1327: munmap(0xFEF64000, 65536) = 0
1327: memcntl(0xFEF60000, 5600, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
1327: close(3) = 0
1327: xstat(2, "/lib/libc.so.1", 0x080467C8) = 0
1327: resolvepath("/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14
1327: open("/lib/libc.so.1", O_RDONLY) = 3
1327: mmap(0xFEFB0000, 32768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFEFB0000
1327: mmap(0x00010000, 1372160, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEE00000
1327: mmap(0xFEE00000, 1263327, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEE00000
1327: mmap(0xFEF45000, 31550, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 1265664) = 0xFEF45000
1327: mmap(0xFEF4D000, 5752, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFEF4D000
1327: munmap(0xFEF35000, 65536) = 0
1327: memcntl(0xFEE00000, 206804, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
1327: close(3) = 0
1327: xstat(2, "/lib/libadm.so.1", 0x080467C8) = 0
1327: resolvepath("/lib/libadm.so.1", "/lib/libadm.so.1", 1023) = 16
1327: open("/lib/libadm.so.1", O_RDONLY) = 3
1327: mmap(0xFEFB0000, 32768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFEFB0000
1327: mmap(0x00010000, 167936, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEDD0000
1327: mmap(0xFEDD0000, 87309, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEDD0000
1327: mmap(0xFEDF6000, 7327, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 90112) = 0xFEDF6000
1327: mmap(0xFEDF8000, 536, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFEDF8000
1327: munmap(0xFEDE6000, 65536) = 0
1327: mmap(0x00000000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFEDC0000
1327: memcntl(0xFEDD0000, 16100, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
1327: close(3) = 0
1327: xstat(2, "/lib/libnsl.so.1", 0x080467C8) = 0
1327: resolvepath("/lib/libnsl.so.1", "/lib/libnsl.so.1", 1023) = 16
1327: open("/lib/libnsl.so.1", O_RDONLY) = 3
1327: mmap(0xFEFB0000, 32768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFEFB0000
1327: mmap(0x00010000, 692224, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFED10000
1327: mmap(0xFED10000, 579129, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFED10000
1327: mmap(0xFEDAE000, 20637, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 581632) = 0xFEDAE000
1327: mmap(0xFEDB4000, 18368, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFEDB4000
1327: munmap(0xFED9E000, 65536) = 0
1327: memcntl(0xFED10000, 109104, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
1327: close(3) = 0
1327: mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFED00000
1327: munmap(0xFEFB0000, 32768) = 0
1327: getcontext(0x08046DD0)
1327: getrlimit(RLIMIT_STACK, 0x08046DC8) = 0
1327: getpid() = 1327 [1326]
1327: lwp_private(0, 1, 0xFED02A00) = 0x000001C3
1327: setustack(0xFED02A60)
1327: sigfillset(0xFEF4D340) = 0
1327: sysi86(SI86FPSTART, 0xFEF4DC98, 0x0000133F, 0x00001F80) = 0x00000001
1327: sysconfig(_CONFIG_PAGESIZE) = 4096
1327: brk(0x0806FA80) = 0
1327: brk(0x08071A80) = 0
1327: xstat(2, "/usr/lib/locale/en_US.ISO8859-1/en_US.ISO8859-1.so.3", 0x08046358) = 0
1327: resolvepath("/usr/lib/locale/en_US.ISO8859-1/en_US.ISO8859-1.so.3", "/usr/lib/locale/en_US.ISO8859-1/en_US.ISO8859-1.so.3", 1023) = 52
1327: open("/usr/lib/locale/en_US.ISO8859-1/en_US.ISO8859-1.so.3", O_RDONLY) = 3
1327: mmap(0x00010000, 32768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFEFB0000
1327: mmap(0x00010000, 90112, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFECE0000
1327: mmap(0xFECE0000, 18090, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFECE0000
1327: mmap(0xFECF4000, 4802, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 16384) = 0xFECF4000
1327: munmap(0xFECE5000, 61440) = 0
1327: memcntl(0xFECE0000, 7676, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
1327: close(3) = 0
1327: mmap(0x00000000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFECD0000
1327: munmap(0xFEFB0000, 32768) = 0
1327: getuid() = 0 [0]
1327: getuid() = 0 [0]
1327: getuid() = 0 [0]
1327: getpid() = 1327 [1326]
1327: open("/proc/1327/psinfo", O_RDONLY) = 3
1327: read(3, "\0\0\00201\0\0\0 /05\0\0".., 336) = 336
1327: close(3) = 0
1327: mmap(0x00010000, 65536, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFECB0000
1327: getuid() = 0 [0]
1327: getuid() = 0 [0]
1327: open64("/var/run/name_service_door", O_RDONLY) = 3
1327: fcntl(3, F_SETFD, 0x00000001) = 0
1327: door_info(3, 0xFEF4679C) = 0
1327: door_call(3, 0x08047098) = 0
1327: open("/etc/security/policy.conf", O_RDONLY) = 4
1327: llseek(4, 0, SEEK_CUR) = 0
1327: llseek(4, 0, SEEK_SET) = 0
1327: fstat64(4, 0x08043150) = 0
1327: brk(0x08071A80) = 0
1327: brk(0x08073A80) = 0
1327: fstat64(4, 0x08043080) = 0
1327: ioctl(4, TCGETA, 0x0804311C) Err#25 ENOTTY
1327: read(4, " #\n # C D D L H E A".., 8192) = 3306
1327: llseek(4, 0xFFFFFFFFFFFFF766, SEEK_CUR) = 1104
1327: llseek(4, 0, SEEK_SET) = 0
1327: read(4, " #\n # C D D L H E A".., 8192) = 3306
1327: llseek(4, 0xFFFFFFFFFFFFF787, SEEK_CUR) = 1137
1327: close(4) = 0
1327: open("/usr/lib/locale/en_US.ISO8859-1/LC_MESSAGES/SUNW_OST_OSCMD.mo", O_RDONLY) Err#2 ENOENT
1327: ioctl(1, TCGETA, 0x08045B9C) = 0
1327: fstat64(1, 0x08045B00) = 0
Looking for CD devices...
1327: write(1, " L o o k i n g f o r ".., 26) = 26
1327: openat(AT_FDCWD, "/dev/rdsk", O_RDONLY|O_NDELAY|O_LARGEFILE) = 4
1327: fcntl(4, F_SETFD, 0x00000001) = 0
1327: fstat64(4, 0x080469B0) = 0
1327: getdents64(4, 0xFED04000, 8192) = 1392
1327: stat64("/dev/rdsk/c1t0d0s2", 0x080465E0) = 0
1327: open64("/dev/rdsk/c1t0d0s2", O_RDONLY|O_NDELAY) = 5
1327: close(5) = 0
1327: open64("/dev/rdsk/c1t0d0s2", O_RDONLY|O_NDELAY) = 5
1327: ioctl(5, 0x0403, 0x08046A2C) = 0
1327: close(5) = 0
1327: resolvepath("/dev/rdsk/c1t0d0s2", "/devices/***@0,0/pci-***@d/***@1/***@0,0:c,raw", 1024) = 45
1327: open64("/devices/***@0,0/pci-***@d/***@1/***@0,0:c,raw", O_RDONLY|O_NDELAY) = 5
1327: ioctl(5, 0x04C9, 0x0806F488) = 0
1327: ioctl(5, 0x04C9, 0x0806F488) = 0
1327: ioctl(5, 0x04C9, 0x0806F488) = 0
1327: ioctl(5, 0x04C9, 0x0806F488) = 0
1327: ioctl(5, 0x042A, 0x08046A50) = 0
1327: ioctl(5, 0x04C9, 0x0806F488) = 0
1327: stat64("/dev/rdsk/c0d0s2", 0x080465E0) = 0
1327: open64("/dev/rdsk/c0d0s2", O_RDONLY|O_NDELAY) = 6
1327: close(6) = 0
1327: open64("/dev/rdsk/c0d0s2", O_RDONLY|O_NDELAY) = 6
1327: ioctl(6, 0x0403, 0x08046A2C) = 0
1327: close(6) = 0
1327: getdents64(4, 0xFED04000, 8192) = 0
1327: close(4) = 0
1327: ioctl(5, 0x04C9, 0x0806F488) = 0
1327: ioctl(5, 0x04C9, 0x0806F488) = 0
1327: ioctl(5, 0x04C9, 0x0806F488) = 0
1327: ioctl(5, 0x04C9, 0x0806F488) = 0
1327: ioctl(5, 0x04C9, 0x0806F488) = 0
1327: ioctl(5, 0x04C9, 0x0806F488) = 0
Initializing device...1327: write(1, " I n i t i a l i z i n g".., 22) = 22
1327: ioctl(5, 0x04C9, 0x0806F488) = 0
1327: ioctl(5, 0x04C9, 0x0806F488) = 0
1327: ioctl(5, 0x04C9, 0x0806F488) = 0
1327: ioctl(5, 0x04C9, 0x0806F488) = 0
1327: ioctl(5, 0x04C9, 0x0806F488) = 0
done.
1327: write(1, " d o n e .\n", 6) = 6
1327: stat64("/zones/sol-nv-b78-x86-dvd.iso", 0x080469E0) = 0
1327: open64("/zones/sol-nv-b78-x86-dvd.iso", O_RDONLY) = 4
1327: fstat64(4, 0x080469E0) = 0
1327: llseek(4, 32768, SEEK_SET) = 32768
1327: read(4, "01 C D 0 0 101\0 S o l a".., 2048) = 2048
1327: llseek(4, 0, SEEK_SET) = 0
1327: fstat64(4, 0x08047210) = 0
1327: ioctl(5, 0x04C9, 0x0806F488) = 0
1327: fstat64(2, 0x08046300) = 0
Size required (1327: write(2, " S i z e r e q u i r e".., 15) = 15
36749312001327: write(2, " 3 6 7 4 9 3 1 2 0 0", 10) = 10
bytes) is greater than available space (1327: write(2, " b y t e s ) i s g".., 41) = 41
5777135774972027201327: write(2, " 5 7 7 7 1 3 5 7 7 4 9 7".., 18) = 18
bytes).
1327: write(2, " b y t e s ) .\n", 9) = 9
1327: _exit(1)
bash-3.2#


This message posted from opensolaris.org

[Joerg.Schilling-8LS2qeF34IpklNlQbfROjRvVK+ (Joerg Schilling)]

Post by John Brewer
These commends used to work, under both Solaris and snv_bXX. This is a good iso image, this was used in a luupgrade from 10u4 w. patches to snv_b78, I tried to create a iso install dvd from the iso image!
bash-3.2# cdrw -i /zones/sol-nv-b78-x86-dvd.iso
Looking for CD devices...
Initializing device...done.
Size required (3674931200 bytes) is greater than available space (577713611856941088 bytes).

This looks like a result from a cdrw bug.

The big problem with cdrw is that it does not check for SCSI error codes and
thus give no hint on what happened or caused the problem

Post by John Brewer
bash-3.2#
bash-3.2# readcd -V dev=1,0,0 -w f=sol-nv-b78-x86-dvd.iso
bash-3.2# svcs |grep vol
online 10:49:00 svc:/system/filesystem/rmvolmgr:default
bash-3.2# svcadm disable rmvolmgr
bash-3.2# readcd -V dev=1,0,0 -w f=sol-nv-b78-x86-dvd.iso
Executing 'inquiry' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 12 00 00 00 60 00
cmd finished after 0.002s timeout 40s
Inquiry Data : 05 80 00 32 5B 00 00 00 48 4C 2D 44 54 2D 53 54 44 56 44 52 41 4D 20 47 53 41 2D 48 31 30 4E 20 4A 4C 31 32 01 00 30 33 31 31 30 39 30 36 31 39 45 34 4B 47 34 30 34 38 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Inquiry Data : ...2[...HL-DT-STDVDRAM GSA-H10N JL12..0311090619E4KG4048........................................
Executing 'read capacity' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB: 25 00 00 00 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s
Capacity: 1 Blocks = 2 kBytes = 0 MBytes = 0 prMB
Sectorsize: 2048 Bytes

The drive cannot correctly read the medium.

Get a _recent_ cdrtools

ftp://ftp.berlios.de/pub/cdrecord/alpha/

and run

cdrecord -minfo

on the medium...

Jörg

[James Carlson]

Post by John Brewer
These commends used to work, under both Solaris and snv_bXX. This is a good iso image, this was used in a luupgrade from 10u4 w. patches to snv_b78, I tried to create a iso install dvd from the iso image!

This is a known Nevada build 78 bug. It was fixed in build 79 -- CR
6628960.